Titanium bar

Titanium bar is one of the most common kinds of titanium products. It is the base material of many titanium products for further processing. The larger diameter titanium bar can be directly produced by forging. We have the free forging equipment which helps to produce the large size titanium bars. In the process of forging, the titanium ingot is deformed uniformly in a short time from inside to outside, improved the titanium mechanical properties. The material quality has been greatly improved compared to the hammer forging; Small diameter titanium bars can be produced after multiple rolling and annealing, and removed titanium oxide layer by mechanical processing in the end.

For pure titanium bars we mainly provide We supply provide pure  titanium bar of Gr1, Gr2, Gr4 etc and titanium alloy bars of Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc.

Material: CP titanium, Titanium alloy
Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc
Size: Diameter: 6～115mm, Length: 10～6000mm
Standard: ASTMB348, AMS4928, AMS 4931B, ASTM F67, ASTM F136 etc
Status: Hot Rolled (R), Cold Rolled (Y), Annealed(M)